Manual Feed PCB Lead Cutting Machine — To trim the extra leads of PCBA

Model : LCM 66

After the PCB has been soldered, the excess leads have to be cut or trimmed. This machine is made for post solder, trimming the excess leads. The soldered PCB is fed through a pair of width adjustable channels, over a circulating circular blade made of Tungsten Carbide, thereby cutting the excess leads. The machine has settings for all the required adjustments.

Enquire Now Call Now @ +91 987 1008 473
FEATURES
  • The machine is designed to trim the extra leads of PCBA after the soldering process
  • The fast turning tungsten carbide blade cuts the wire leads while the PCB are fed on the machine track manually
  • For safety, it is absolutely required to push the PCBA by handle
SPECIFICATIONS
Suitable for Tungsten Carbide Blade ID- 70 mm , OD - 200 mm & 250mm both size
Thickness of PCB 0.8mm to 2.5mm
Max. PCB Size 500mm (L) x 300mm (W)
Power 220 V AC, 50 Hz
Main Spindle Speed 4500 RPM
Main Motor Power HP
Cutting Height 0.6 mm Minimum
Weight 95 Kg

Related Products

Yontro